Slider Rails - Heavy Duty

Tools Required:

• 5mm Screws (provided with the kit)
• Screwdriver

Components:

• BlackMOA™ Fixed Cassette Toilet
• Sliding Plate with Rails
• Small Screws for securing

Step 1: Prepare the Setup

• Ensure all parts are present: BlackMOA™ Cassette Toilet, Sliding Plate with pre-attached Rails, and Screws.

Step 2: Position the Toilet

• Carefully turn the BlackMOA™ Cassette Toilet upside down on a smooth surface to expose the bottom plate.

Step 3: Align the Sliding Plate

• Take the Sliding Plate, ensuring the side with the wheels is facing towards where the Cassette door will be when the toilet is upright (Front Facing Sliders ⇅).
• Position the Sliding Rail Plate under the toilet such that the holes on the plate align with those on the bottom of the toilet.

Step 4: Secure the Plate

• Insert the 5mm screws into the aligned holes.
• Use a screwdriver to secure the screws tightly.
• Ensure there are no loose parts and that the plate is sturdy. There should be four screws in total.

Step 5: Verify the Lock Mechanism

• Confirm that the locking mechanism on the Sliding Plate is engaging properly. There should be locks located on the side and the back of the plate.

Step 6: Finalize Installation

• Test the slide mechanism by gently pushing and pulling to ensure the toilet moves smoothly along the rails.
• Confirm the toilet locks via built-in locking mechanisms.

Step 7: Completion

• Double-check all connections and locking points to ensure everything is secure.
• The toilet should now be securely mounted and ready for use.

Additional Tips:

• Regularly check the screws and locks for any looseness.
• Ensure that the slide mechanism remains clean and unobstructed for optimal performance.
• Watch the demo video here.